This shows you the differences between two versions of the page.
gea_box_failu_es_can_be_solved_by_using_gea_cutting_se_vices [2023/08/02 13:27] – created vonmacadam6407 | gea_box_failu_es_can_be_solved_by_using_gea_cutting_se_vices [2023/08/02 13:44] (current) – removed wes | ||
---|---|---|---|
Line 1: | Line 1: | ||
- | If you have experienced a gearbox failure, you may need to get it repaired as soon as possible. A skilled service technician will be able to accurately identify the problem and recommend the appropriate solution for the repair. This will save you money on repairs and help keep the crane operating at optimum performance. In many cases, an industrial gearbox overhaul can save you 40 to 50 percent over the cost of a new unit. These savings are calculated by taking into account the operating costs, salvage value, and potential revenue. | ||
- | Many gearbox repairs require welding and metal fabrication, | ||
- | |||
- | One of the primary causes of premature gear wear is improper lubrication. Thin oil will not provide adequate protection against friction, which wears down gears prematurely. Other causes include the drive design itself. Some reducers are designed to handle a certain horsepower level, so exceeding that limit can cause premature gear wear. | ||
- | |||
- | Premature wear of the gears and bearings causes unintended movement and vibration. Proper gearing designs allow for a certain amount of backlash and internal clearance. Too much gear wear causes the teeth to engage at unintended angles, creating unintended forces. Proper gearing and bearing repair can ensure your gears are operating as designed. | ||
- | |||
- | (Image: [[https:// | ||
- | |||
- | Proper lubrication is essential for planetary gearbox repair. Proper lubrication prevents the gears from wearing out and reduces vibration and noise. | ||
- | |||
- | A professional [[https:// |